Tuesday, April 14, 2015
How to root Samsung galaxy All Models Using Odin
BASIC INSTRUCTIONS
All downloads contain .tar.md5 files flashable in ODIN as PDA.
Make sure your device is in ODIN download mode (usually you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin3-v1.85.exe file, press the PDA button, select the .tar.md5 file, and click Start. You can find more detailed instructions and assistance at XDA.
A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.
For the root to work, the device must reboot into recovery. Most devices will do this automatically after flashing these files, but in case that does not happen, please boot into recovery manually.
(Go and download your Cf Root file)
(ODIN)
(Samsung USB Driver )
Monday, April 13, 2015
CyanogenMod11 Android 4.4.4 Rom For Galaxy S3 LTE SK (SHV-E210S, c1skt) Galaxy S3 LTE KT (SHV-E210K, c1ktt)
* Warning * |
Do not redistribute, modify, fetch, extract files used within this
project or integrate with other files without my permissions.
Making mirrors, re-uploading to another servers are strictly
prohibited with no exceptions. |
* Supported device * |
Galaxy S3 LTE SK (SHV-E210S, c1skt)
Galaxy S3 LTE KT (SHV-E210K, c1ktt)
|
(ROM)
(arter97 kernel)
|
* Installation * |
0. Perform a full factory reset if you're coming from another
series of ROM
1. Use ClockworkMod or PhilZ recovery and flash ROM
2. Install Gapps (PA Gapps recommended)
3. Install arter97 kernel
|